Yealink Template cordless W76P

#!version:1.0.0.1

### This file is the exported MAC-all.cfg.

### For security, the following parameters with password haven't been display in this file.
###account.1.password =
account.1.auth_name = 256861_2006
account.1.codec.pcmu.priority = 1
account.1.codec.pcma.priority = 2
account.1.codec.g729.enable = 0
account.1.codec.g729.priority = 2
account.1.codec.g722.enable = 0
account.1.display_name = Dental Studio On Wellesley
account.1.enable = 1
account.1.label = Dental Studio On Wellesley
account.1.sip_server.1.address = 10wellesleyvoip.tasprovider.com
account.1.sip_server.1.expires = 300
account.1.sip_server.2.expires = 300
account.1.user_name = 256861_2006
default_input_method.advanced_setting_password = 123
directory.edit_default_input_method = ABC
expansion_module.backgrounds = Default:Default-exp.jpg
features.call_park.enable = 1
features.config_dsskey_length = 2
features.parked_call_monitor.blf_audio_enable = 0
features.parked_call_monitor.blf_visual_enable = 1
features.pickup.blf_audio_enable = 1
features.pickup.direct_pickup_enable = 1
features.power_saving.enable = 0
handset.1.name = 2006
linekey.10.line = 0
linekey.10.type = 0
linekey.11.line = 0
linekey.11.type = 0
linekey.12.line = 0
linekey.12.type = 0
linekey.13.line = 0
linekey.13.type = 0
linekey.14.line = 0
linekey.14.type = 0
linekey.15.line = 0
linekey.15.type = 0
linekey.16.line = 0
linekey.16.type = 0
linekey.2.line = 0
linekey.2.type = 0
linekey.3.line = 0
linekey.3.type = 0
linekey.4.line = 0
linekey.4.type = 0
linekey.5.line = 0
linekey.5.type = 0
linekey.6.line = 0
linekey.6.type = 0
linekey.7.line = 0
linekey.7.type = 0
linekey.8.line = 0
linekey.8.type = 0
linekey.9.line = 0
linekey.9.type = 0
local_time.dhcp_time = 1
local_time.time_zone = -5
local_time.time_zone_name = Canada(Montreal,Ottawa,Quebec)
phone_setting.backgrounds = Resource:02.png
phone_setting.custom_headset_mode_status = 1
phone_setting.idle_dsskey_and_title.transparency = 40%
phone_setting.page_tip = 1
voice.group_listening.spk_vol = 11
voice.handfree.spk_vol = 5
voice.handfree.tone_vol = 3
voice.handset.spk_vol = 11
voice.handset.tone_vol = 9
voice.ring_vol = 2
voice_mail.number.1 = *97
### Static Configuration ###
static.features.default_account = 2
static.network.primary_dns = 1.1.1.1
static.network.secondary_dns = 8.8.8.8
static.network.static_dns_enable = 1
static.network.wifi.internet_port.type = 0
static.network.wifi.ip_address_mode = 0
static.network.wifi.ipv6_icmp_v6.enable = 1
static.network.wifi.ipv6_internet_port.type = 0
static.network.wifi.ipv6_prefix = 64
static.network.wifi.ipv6_static_dns_enable = 0
static.network.wifi.preference = 0
static.network.wifi.static_dns_enable = 0
static.station.mode = 0

  • 0 Utenti hanno trovato utile questa risposta
Hai trovato utile questa risposta?

Articoli Correlati

Recovery Mode

hold down the speaker or the redial button on boot you should be able to get to the USB recovery...

Groundwire config for iOS

Download Groundwire for iOS. #acrobits Title: Company Name  Username and Account#:...

Yealink Template

You may save the below codes to a cfg file like phone.cfg and change the parameter that has...